Paperclay
Mandy Long talks about Paperclay and Raku.
Paperclay is made by mixing paper pulp (cheap loo roll in my case) with clay slip at the making stage.
It looks like porridge but once you spread dollops of it out onto plaster bats it dries slightly and gives you something like a sheet of leather to work with. It's amazing stuff and has different properties from normal clay, much kinder to work with. When it's fired the paper content burns out leaving a slightly lighter body than you'd normally get with clay.
Raku, as many people will have seen on Pottery Throw Down, is an outdoor firing - in my case weather dependent.
Previously bisque fired work in an electric kiln, is glazed using a high alkali frit glaze. It's placed in the kiln out of doors and heated to around 900 degrees by a gas burner. When it reaches temperature, I don gloves and masks and tong it out of the open kiln and into a metal dustbin of sawdust. The lid is popped on quickly.

After about 15 minutes I remove it again with either gloves or tongs and put it into cold water. This is quite a shocking process for anyone who knows about ceramics because we usually do things more gradually. A piece can go from zero to 900 and back in the space of about 40 minutes!
The bare areas which haven't been glazed are blackened by the burning sawdust and the glaze crackles and draws black carbon through the cracks in the white glaze. It's a really exciting way of getting a surface finish because it is unpredictable to some extent and thrilling to see what the fire and smoke will do.